SMS-D6-150螺栓製造機

螺栓製造機

產品描述

Bolts are one of the most basic components of engineering and construction, yet their production has become an advanced, high-tech process with multiple steps. Find out how raw steel is transformed into highly specified and exact metal implements.

Bolts can come in a wide range of different sizes and shapes, but the basic production process generally remains the same. It starts with cold forging steel wire into the right shape, followed by heat treating to improve strength and surface treating to improve durability, before being packed for shipment. However, for more advanced bolt designs, the production process can expand by a number of additional steps.

Cold forging starts with large steel wire rods, which are uncoiled and cut to length. The grade of steel is standardized across the industry, according to the requirements of ISO 898‑1. Using special tooling, the wire is then cold forged into the right shape. This is basically where the steel is molded, while at room temperature, by forcing it through a series of dies at high pressure. The tooling itself can be quite complex, containing up to 200 different parts with tolerances of hundredths of a millimeter. Once perfected, cold forging ensures bolts can be produced quickly, in large volumes, and with high uniformity.

In mass manufacturing. bolts are made in 2 steps.

1. Basic shape : The head of the bolt(hex/allen cap etc) and shape of nut(hex/winged etc) is forged out of metal either by cold or hot forging.

2. Threading: The threading in nuts are either done by Tap or turning depending upon the size and specification. The threading on the bolts are usually rolled or turned or made using Die. >>>Get more information

觀看視頻

SMS-D6-90全自動螺栓製造機

單元SMS-D6-90
直徑毫米Φ4.0-9.0
Max.Blank Length毫米90
Max.Cut-off Length毫米131
Stroke毫米120
容量pcs./min80-100
主模尺寸毫米Φ50*120
第一和第二拳的大小毫米Φ35*100*2
切割模具尺寸毫米Φ24*40
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米2700*1400*1600
淨重公斤3380
觀看視頻

SMS-D6-120螺栓製造機供出售

單元SMS-D6-120
直徑毫米Φ4.0-9.0
Max.Blank Length毫米120
Max.Cut-off Length毫米148
Stroke毫米150
容量pcs./min70-90
主模尺寸毫米Φ50*150
第一和第二拳的大小毫米Φ35*100*2
切割模具尺寸毫米Φ24*40
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米2800*1400*1600
淨重公斤3640
觀看視頻

SMS-D6-150螺栓製造機

單元SMS-D6-150
直徑毫米Φ4.0-9.0
Max.Blank Length毫米150
Max.Cut-off Length毫米170
Stroke毫米190
容量pcs./min60-70
主模尺寸毫米Φ50*180
第一和第二拳的大小毫米Φ35*100*2
切割模具尺寸毫米Φ24*40
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米3000*1400*1600
淨重公斤4160
觀看視頻

SMS-D6-170自動螺栓製造機

單元SMS-D6-170
直徑毫米Φ4.0-9.0
Max.Blank Length毫米170
Max.Cut-off Length毫米190
Stroke毫米230
容量pcs./min50-60
主模尺寸毫米Φ50*220
第一和第二拳的大小毫米Φ35*120*2
切割模具尺寸毫米Φ24*55
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米3200*1400*1600
淨重公斤4160
觀看視頻

SMS-D6-200 U型螺栓製造機

單元SMS-D6-200
直徑毫米Φ4.0-9.0
Max.Blank Length毫米200
Max.Cut-off Length毫米220
Stroke毫米250
容量pcs./min40-50
主模尺寸毫米Φ50*240
第一和第二拳的大小毫米Φ35*120*2
切割模具尺寸毫米Φ24*55
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米3650*1400*1650
淨重公斤4940
觀看視頻

SMS-D6-250 Steel Bolt Making Machine

單元SMS-D6-250
直徑毫米Φ4.0-9.0
Max.Blank Length毫米250
Max.Cut-off Length毫米270
Stroke毫米290
容量pcs./min30-45
主模尺寸毫米Φ50*290
第一和第二拳的大小毫米Φ35*140*2
切割模具尺寸毫米Φ24*60
Cutter Size毫米12*35*77
Mail Motor Power千瓦5.5
Oil Pumpw370(1/2HP)
Outer Size of the machine(L*W*H)毫米3700*1500*1700
淨重公斤5460

Machine needed to make bolt

所需工藝和機器簡介:

(1). Pull the coarse line to the line patch needed. (Wire drawing machine)

(2). Adjust, produce, and form the head of screw on the heading machine. (Bolt heading machine)

(3).Grind tooth on the coil thread rolling machine, and form the screw completely (Bolt thread rolling machine)

(4). Treat the semi-finished screw in the heat treatment according to the standard (Heat treatment furnace)

(5). According to the requirements, process plating etc. (Zinc plating machine)

(6). Packing and out of factory

Why do we choose Somose bolt making machines?

We are professional manufacturer of various kinds of bolt making machines, Which has over 18 years experience for producing bolt production line. Not only have rich experience to produce high quality machine , but also with strong technical team as basis.